EMOLAK-EKO DO KALORYFERÓW (S-5)

APPLICATIONS:
EMOLAK-EKO FOR RADIATORS (S-5) is suitable for both protective and decorative painting of heating appliances e.g. cast iron radiators, steel panel-type radiators, central heating systems etc., and metal elements after their priming is made.

GENERAL DESCRIPTION:
EMOLAK-EKO FOR RADIATORS (S-5) is an environment-friendly, water-borne, acrylic dispersion based product. It forms smooth white coats that are not-yellowing even at temperature of 150°C. It features excellent coating properties and short drying time.

EMOLAK-EKO FOR RADIATORS (S-5) is certified for use by the National Institute of Hygiene in Warsaw.

PROPERTIES:
Viscosity: 2000-4000 mPa-s
Specific gravity, max: 1,4 g/cm³
Volatile components content, max: 58%

DIRECTIONS FOR USE:
Stir well before use. Apply with brush, roller or by spraying. In case of new radiators, apply the enamel paint (S-5) on surfaces well cleaned, free of grease, rust and well primed. For already painted radiators, remove bubbles and rusty places, sand the surface with abrasive paper. Protect uncovered metal areas with an anticorrosive primer. The enamel paint (S-5) can be applied, when the temperature of the substrate is within +5°C up to +25°C. Do not paint hot radiators. The next layer can be applied after about 8 hours.

CAUTION!
To be stored at temperatures above +5 °C.

HEALTH AND FIRE HAZARD INFORMATION
EMOLAK-EKO FOR RADIATORS (S-5) is an environment-friendly product. It is non-toxic and non-flammable. On completion of painting, ventilate the room until odour is eliminated.

CONTAINER TYPE AND MATERIAL: Metal tins with capacity of 0.4 l; 0.8 l;

Application method: