EMOLAK-EKO (S-8)
general-purpose enamel, water borne
APPLICATIONS:
EMOLAK-EKO (S-8) water borne enamel paint is intended for both
protective and decorative painting of surfaces and objects made of wood,
wood-based materials, iron and non-ferrous metals in both interior and
outdoor applications, for painting of mineral substrates (all kind of plasters,
concrete etc.)
At the moment it is produced in white colour (glossy and mat).
GENERAL DESCRIPTION:
EMOLAK-EKO (S-8) is an environment-friendly product, forming smooth silky coats.
It features durability of coats, short drying time, easy application and high
mechanical properties, weather resistance and chemical resistance to chemicals
used for household purposes.
This product is certified for use by the National Institute of Hygiene in Warsaw. It is awarded with the Ecology Badge from the Institute of Plastics and Paint Industry in Gliwice, the Technical Approval of the Institute of Building Engineering (ITB) No. AT-15-4206/00, and is approved for use in the building industry as well. It is also recommended for use by the Association of Polish Cabinet-Makers and has been awarded with the Gold Medal at the Poznań International Fairs. Also it has been awarded by Business Center Club with European Medal. This product is manufactured under the licence No.VC-HJ-LIC 00/05/-V1.
PROPERTIES:
Viscosity, in function of colour, max: 2200-2300 mPa-s
Specific gravity, in function of colour, max: 1.4 g/cm3
Solids content: 47 %
4 h |
to 12 m2/l |
18 months |
1-2 |
H2O |
DIRECTIONS FOR USE:
Stir the product thoroughly before use. The paint can be applied by brushing, rolling or air spraying.
When necessary, dilute with up to 5% potable/municipal water. In case of double painting, apply the topcoat after 3-5 hours. The substrate to be painted should be clean, dry, coherent, free from grease and well primed. For unpainted wood and wood-based substrates, clean them, sand and thoroughly remove dust and impregnate. Then apply 1-2 layers of EMOLAK-EKO. For old substrates, sand them with fine abrasive paper, remove all scaling and peeling, feather the surface by filling and apply 1-2 layers of enamel paint. For unpainted iron and steel substrates, thoroughly remove all rusty metals, grease, dirt and dust and prime with anticorrosive paint and apply 1-2 layers of enamel paint EMOLAK-EKO. For surfaces already painted and used for a some time, thoroughly clean them, remove grease and sand with a fine abrasive paper. Remove all blistering, flaking and scaling to a sound metal substrate and prime the surface. Apply 1-2 layers of enamel paint onto such prepared surface.
For plaster and concrete substrates, clean them, remove all peeling, dry, impregnate and apply 1-2 layers of enamel paint EMOLAK-EKO. When painting, avoid intense sunlight, ensure that the relative humidity is not above 80%, whilst the substrate and ambient temperatures should exceed +5°C. On completion of the painting work, rinse the paint tools with running water. The dried paint can be removed using a thinner for nitrocellulose products.
CAUTION! To be stored at temperatures above +5 °C.
