ART DECO IMPRESJA(W-7)

emulsion acrylic paint for interior applications high hiding power

ART DECO IMPRESJA being produced using highest quality components and modern production technologies, offers ease of painting and excellent decorative effect. The formula has been especially designed with the most demanding customers in mind, therefore it guarantees the best possible effect on the painted surfaces. Dense thixotropic consistency prevents the paint from dripping during application, provides excellent coverage and efficiency up to 12m2/l. Microfibers featured in this paint make the surface flexible, it does not crack and prevents micro-cracks in the base from being visible.

APPLICATIONS:
This acrylic emulsion ART DECO (W-7) is intended for painting of walls and ceilings in residential and public areas: hospitals, schools, offices etc. It is suitable for painting of concrete, brick, cement and mortar plasters, cement plasters, gypsum plasters, gypsum cardboards and also wood, wood-based materials and wallpapers made of paper or glass fibre. The emulsion is produced as having the following standard colours: pudding, sunny, cream-coloured, subtle beige, nut, cappuccino, apricot, salmon, honey, peach-coloured, cork, mint, pistachio, aloetic, olive, lavender, plum, vanilla, pastel heath, heath, gray, blue, azure.

GENERAL DESCRIPTION:
The paint ART DECO (W-7) is a modern environment-friendly product tailored to meet the most demanding applications of the customers that search for products of the utmost quality, which guarantee the obtaining of high aesthetic and practical characteristics of the painted areas. It is characterised by an excellent adhesion to the surface, short drying time and excellent coating properties, thereby one coat is usually adequate. It forms niveous, mat and durable coats permeable to steam and air, resistant to multiple washing with water.

This emulsion ART DECO (W-7) is certified for use by the National Institute of Hygiene in Warsaw, and it also is certified for use in the building industry.

PROPERTIES:
Viscosity: 8 000-10 000 mPa•s
Specific gravity, max: 1.55 g/cm3
Solids content, at least: 53%
Water solubility: completely soluble


2 h

12 m2/l

24 months

1-2

H2O


DIRECTIONS FOR USE:
Stir the product thoroughly before use. Dilute with water, if necessary. The product can be applied with a brush, roller, painter's sponge or by air spraying. The substrate to be painted should be even, smooth, coherent, clean and dry. All damaged surfaces, if any, should be repaired with 24-hour advance. For surfaces stained with grease, seepage, nicotine or soot, cover them with the paint REMOMAT (W-11) for stains and seepage. Newly made plasters can be painted after at least 4 week curing. In case of glued paint coats, remove them by scraping and wash off the entire surface with potash soft soap solution and then with fresh water. In case of emulsion coats, remove loosen coats and wash off the entire surface with water and detergent. For wood and wood-based surfaces, impregnate them with anti-fungus impregnate. After drying, polish the substrate and apply one coat of emulsion (W-7). The emulsion may be coloured with emulsion paste paint. The product can be applied at temperature of +5°C up to +30° C.
CAUTION! To be stored at temperatures above +5°C.




HEALTH AND FIRE HAZARD INFORMATION:
ARTDECO (W-7) is an environment-friendly product. It is non-toxic and non-flammable. Provisions for adequate ventilation must be made after painting to remove odour.

CONTAINER TYPE AND MATERIAL: Plastics-made containers with capacity of 3.0 l; 5.0 l; 10.0 l.


Application method: