MÓJ DOM (S-6)
general-purpose phthalate enamel paint
APPLICATIONS:
Phthalate enamel paint (S-6) is intended for both protective and decorative painting of wood and wood-based materials (windows, doors, furniture etc.), mineral substrates (all kind of plasters, concrete etc.) and metals, both in interior and exterior applications. The enamel is produced as having the following colours: white, brown, black, deep sea, light nut, medium nut, sappy green, sunny, cream coloured, ivory, peach-coloured, blue, pistachio, heath, red, sky blue, gray, steel gray. It is also available in a wide range of RAL colours.
GENERAL DESCRIPTION:
Phthalate enamel paint general-purpose (S-6) features a good adhesion to the substrate, high lustre, and good weather resistance and mechanical properties.
Phthalate enamel paint general-purpose MÓJ DOM (S-6) is certified for use by the National Institute of Hygiene in Warsaw and for use in the building industry as well.
PROPERTIES:
Specific gravity, max: 1,25 g/cm3
Volatile components content, max: 40%
Flash time (apparent viscosity): 80-140 s
to 14 h |
to 11 m2/l |
12 months |
1-2 |
for phthalate products |
DIRECTIONS FOR USE:
Stir the product thoroughly before use. The paint can be applied by brushing, rolling or air spraying. The surface to be painted should be clean, dry, coherent, free of grease and adequately primed. For unpainted wood and wood-based substrates, clean them, sand and thoroughly remove dust, then impregnate with NATURAL LINSEED VARNISH (LEAD-FREE) (LP-6) - diluted with thinner for general-purpose oil and phthalate products (R-2) at a 1:1 solution - and prime with a general-purpose phthalate primer. Then apply 1-2 layers of enamel paint (S-6). When repainting, clean the surface thoroughly with fine-grain abrasive paper, remove all blistering and scaling paint, feather the surface by filling and apply 1-2 layers of enamel paint (S-6). For unpainted steel substrates, remove thoroughly all rusty metals, grease, clean them and prime with anticorrosive paint and apply 1-2 layers of enamel paint (S-6). For already painted and used metal surfaces, thoroughly clean them,
remove grease and sand with a fine abrasive paper. Remove all blistering, flaking and scaling to a sound metal substrate and prime the surface. Apply 1-2 layers of enamel paint (S-6) onto such prepared surface. For surfaces of plasters and concrete, clean them, remove all blistering and scaling, dry, prime with an impregnating primer and apply 1-2 layers of enamel paint (S-6).
