MÓJ DOM (S-7)
general-purpose water borne acrylic enamel paint
APPLICATIONS:
Water borne acrylic enamel paint MÓJ DOM (S-7) is intended for both protective and decorative painting of surfaces and objects made of wood and wood-based materials (windows, doors, furniture etc.) and metal, in both interior and outdoor applications. It is also suitable for painting of mineral substrates indoor.
GENERAL DESCRIPTION:
Water-based acrylic enamel paint MÓJ DOM (S-7) is an environment-friendly product, forming smooth and lustre coats. It features durability of coats, short drying time, is easy to apply and has high mechanical properties, weather resistance and resistance to chemicals used for household purposes.
This product is certified for use by the National Institute of Hygiene in Warsaw and for use in the building industry as well.
PROPERTIES:
Viscosity: 2000-4000 mPa-s
Specific gravity, max: 1,2 g/cm3
Volatile components content, max: 58 %
to 6 h |
7 - 9 m2/l |
12 months |
1-2 |
H2O |
DIRECTIONS FOR USE:
Stir the product thoroughly before use. The paint can be applied by brushing, rolling or air spraying.
When necessary, dilute with up to 5% potable/municipal water. In case of double painting, apply the topcoat after 5 hours. The substrate to be painted should be clean, dry, coherent, free from grease and well primed. For unpainted wood and wood-based substrates, clean them, sand and thoroughly remove dust, impregnate with anti-fungus impregnate and prime. Then apply 1-2 layers of acrylic water borne enamel paint (S-7). For old substrates, sand them with fine abrasive paper, remove all scaling and peeling, feather the surface by filling and apply 1-2 layers of enamel paint (S-7). For unpainted metal substrates, remove thoroughly all rusty metals, grease, clean them and prime with anticorrosive paint and apply 1-2 layers of enamel paint. For surfaces already painted and used for a some time, thoroughly clean them, remove grease and sand with a fine abrasive paper. Remove all blistering, flaking and scaling to a sound metal substrate and prime the surface. Apply 1-2 layers of enamel paint (S-7) onto such prepared surface. For mineral substrates, clean them, remove all peeling, dry, prime with impregnate for mineral substrates and apply 1-2 layers of enamel paint (S-7). When painting, avoid intense sunlight, ensure that the relative humidity is not above 80%, and both the substrate and ambient temperature be above +5°C. On completion of the painting work, rinse the paint tools with running water. Dried coats can be removed with a thinner for nitrocellulose products.
CAUTION! To be stored at temperatures above +5°C.
